Station Kits

To allow for custom design, the station electronics are available as kits.  Like all STENTOFON stations, the station kits feature high audio bandwidth accomplished through the use of a wide-band audio codec. VoIP station kits connect directly to the IP network making it easy to deploy anywhere at any distance.

You will find a complete overview of the station kit range in the STENTOFON catalogue.

  • The STENTOFON IP Master Station Kit features the electronics board as used in STENTOFON IP master stations.
    Station Kits

    Features

    • Master station PCB made for Critical Communication over IP (CCoIP®) in custom made station housings
    • Superb audio technology – gives loud-speaking hands-free duplex communication from any location in the room
    • Remote software upgrade, configuration and monitoring
    • Integrated data switch with advanced networking and security functions
    • Powered from the IP network cable using Power over Ethernet (PoE)
    • Supports large high contrast display with white backlight for excellent readability
    • Supports handset and headset
    • Supports full keyboard
    • Supports digital inputs and output via built-in relay
    • Supports external audio amplifiers

    Description

    The STENTOFON IP Master Station Kit features the electronics board as used in STENTOFON IP master stations. It is designed to produce custom IP stations to the highest specifications and for use in the harshest of environments.

    The IP Master Station Kit provides upto 1.5 W audio output. If even higher audio output is required an external power amplifier can be used. As a special function, the PCB can extract power from the Ethernet’s PoE circuit and give upto 6 W power to external units. This means that the PCB can power an external power amplifier using its own PoE.

    The PCB has one relay output and three logical inputs. These outputs can for instance be used to control and open a door or PA interface. The operation of the outputs and inputs are programmable and controlled by the AlphaCom exchange.

    Like all STENTOFON stations, this IP station PCB features superb audio quality. This is enabled through a set of advanced technologies such as active noise filtering, acoustic echo cancellation, wide band audio codec, and high power audio outputs.

    The IP station PCB has an integrated managed data switch providing advanced networking and security features. The integrated switch provides support for:

    • Protection from unwanted access
    • Quality of Service (QoS) by managing data traffic
    • Increased system availability through redundant LAN infrastructure
    • Cost efficient installation by providing shared network connections

    To provide maximum availability the station comes with advanced supervision functions. The station line test will detect if there is any faults in the network or station electronics. In addition the station supports tone test, testing the complete transmission path including microphone and speaker. The status of the stations is reported to AlphaWeb as well as to 3rd party management systems using SNMP, Syslog or OPC.IP Substation Kit

  • The STENTOFON IP Substation Kit features the electronics card as used in STENTOFON’s own IP substations.
    IP Substation Kit

    Features

    • Designed to deliver CCoIP® - Critical Communication over IP
    • Enables manufacturing of custom made IP substations
    • Remote software upgrade, configuration and monitoring
    • Integrated data switch with advanced networking and security functions
    • Relay output for remote control, e.g. doors, signal lamps and gates
    • Powered from the IP network cable using Power over Ethernet (PoE)
    • Superb audio quality – high bandwidth codec, active noise cancellation, acoustic echo cancellation and high output power amplifier

    Description

    The STENTOFON IP Substation Kit features the electronics card as used in STENTOFON’s own IP substations. It is designed to produce stations to the highest specification and for use in the harshest of environments.

    Designed for CCoIP® the station card offers a set of critical communication features such as integrated firewall, group call, call priority and over-ride, to name just a few. This enables you to deliver instant, efficient and secure voice and data services in an IP environment.

    Like all STENTOFON stations, this IP substation kit features superb audio quality. This is enabled through a set of advanced technologies such as active noise filtering, acoustic echo cancellation, wide band audio codec, and high power audio outputs.

    The station card has one relay and one logical output. These outputs can, for instance, be used to open a door through a connected relay. The operation of the outputs is programmable and controlled by the AlphaCom exchange.

    The IP substation card has an integrated managed data switch providing advanced networking and security features. The integrated switch provides support for:

    • Protection from unwanted access
    • Quality of Service (QoS) by managing data traffic
    • Increased system availability through redundant LAN infrastructure
    • Cost efficient installation by providing shared network connections

    To provide maximum availability the station comes with advanced supervision functions. The station line test will detect if there is any faults in the network or station electronics. In addition the station supports tone test, testing the complete transmission path including microphone and speaker. The status of the stations is reported to AlphaWeb as well as to 3rd party management systems using SNMP, Syslog or OPC.

    VoIP Intercom Module

    STENTOFON TKIS-2. VoIP Intercom Module with 10 w built in amplifier.

    Make your own 10W IP speaker or intercom station. Being highly customizable this intercom module can cover your need for VoIP/CCoIP anywhere. Use it as part of a Parking solution, cash point or help point.

    The top complaint about voice audio in the security industry is how poor audio quality affects everything, from providing a more secure environment, to critical mistakes and inefficiencies due to inadequate communications. However, this intercom module kit offers HD audio quality for indoor and outdoor environments, and it can, for example, be used as a communication solution for vehicle entry, exit gates, pay-on-foot machines and emergency help points in parking facilities. Plus, to improve audio quality, it features active noise cancellation, automatic volume adjustment and a 10W Class D amplifier.

    The STENTOFON VoIP Intercom Module utilizes the latest technology to create unparalleled audio quality. Some of the many features include: HD voice quality, Open Duplex, Active Noise Cancellation, Automatic Volume Adjustment, MEMS microphone support, and a 10W Class D amplifier. These features, in conjunction with STENTOFON’s 65+ years of experience with acoustic technology are only a few of the many factors that make our audio quality second to none.

    Highlights:

    • STENTOFON Audio Presence - crystal clear audio
    • DIN-rail mountable, clips included
    • Add VoIP/CCoIP to your parking solution, cash point, vending machine, et al
    • Build your own IP Intercom station or help point
    • Make your own 10W IP Speaker
    • Control relay and I/Os over IP
    • Supports AlphaCom, Pulse and SIP (for use with any IPBX)
    • Supports a wide set of IP networking standards
    • Remote software upgrade, configuration and monitoring
    • Powered from the IP network cable using Power over Ethernet (PoE)
    • Advanced audio technology like automatic gain and volume adjustment, background noise cancellation, open duplex, etc.
  • TKIE-1

    The TKIE-1 is the extended version of our Turbine Kit range. It offers the same high quality audio as the TKIS-x kit, but adds to the feature list with an extra RJ45 port for dual Ethernet connectivity, dual relays, and a header for easy connection of audio accessories. For high-power applications, the TKIE-1 may be complemented with the TA-10 Relay Module which offers 2 DPDT relays suited for high-voltage/high-current applications.

    FEATURES

    • IP station kit with extended functionality
    • Dual RJ45 for Ethernet connectivity (with switch)
    • Dual relays (DPDT) 6 configurable I/Os (input, output or LED-driving)
    • Line-in/Line-out connectivity for connection to audio devices
    • Header for connecting audio accessories
    • Possibility for connecting high-power relay module (TA-10)
    • High quality Turbine™ class output with 10W amplifier
    • Full open duplex and digital noise reduction

    Download Brochures & Datasheets here

Share this page...

© Copyright 2017 STENTOFON Communications Australia | Website Design by Sites n Stores