The TKIE-2 is the extended version of the Turbine Kit range and the most flexible integration platform. It offers the same high quality audio as the TKIS-2 kit, and adds to the feature list with an extra RJ45 port for dual Ethernet connectivity, dual relays, and a header for easy connection of audio in and outputs, such as line-level inputs/outputs and audio accessories such as headsets/handsets.
The TKIS/TKIE range can be used as a point of integration for AlphaCom and Exigo systems towards legacy PAGA, radio systems, analogue PABX, etc.
The TKIE-2 offers I/O and signal relays. For high-power switching applications, the TKIE-2 may be complemented with the TA-10 Relay Module which offers 2 DPDT relays suited for high-voltage/high-current loads.
FEATURES
See also: additional documentation on wiki.zenitel.com
| AUDIO | |
| Noise cancelling – suppression of musical noise | YES |
| Noise cancelling – suppression of static noise | YES |
| Noise cancelling – suppression of rapidly changing noise | YES |
| Codecs | G.711, G.722, G.729 |
| Frequency range, G.722 Codec | 200 Hz – 7000 Hz |
| Audio technology | Modes: Full open duplex, switched open duplex |
| Adaptive jitter filter | |
| Local tone generator | |
| Audio mixing – 3 channels | |
| Sound level detection (scream alarm) | |
| Automatic gain control (microphone) | |
| Automatic volume adjustment | |
| 10 W class D | |
| Digital MEMS microphone | |
| Electret microphone | |
| 8 ohm |
| HARDWARE | |
| Ethernet connector | 2 x RJ45 |
| All other connectors | Tool less, spring loaded, vibration proof terminals |
| General inputs and outputs | 6 (configurable), |
| Outputs | 12mA as LED drivers |
| Change-over relays (NO+NC+COM) | Max: 250VAC/220VDC, 2A, 60W |
| Power options | PoE and or external power supply |
| PoE (power over Ethernet) | IEEE 802.3af standard, Class 0 (0.44W to 12.95 W) |
| External power supply | 24 VDC (16 – 48 V) |
| Power consumption | Idle 1.8W, max 12W (depending on volume) |
| Audio line out / Induction loop signal | 600 ohm |
| NETWORKING AND PROTOCOLS | |
| Protocols | IPv4 (with DiffServ), SIP, TCP, UDP, HTTPS, TFTP, RTP, DHCP, SNMP, VINGTOR-STENTOFON CCoIP® , NTP |
| LAN protocols | Power over Ethernet (IEEE 802.3 a-f) Network Access Control (IEEE 802.1x) |
| Management and operation | HTTP/HTTPS (Web configuration) DHCP and static IP + VINGTOR-STENTOFON Pulse™ Remote automatic software upgrade Centralized monitoring |
| Advanced supervision functions | E.g. network test, tone test, status reports |
| SIP Support | RFC 3261 (SIP base standard) |
| RFC 3515 (SIP refer) | |
| RFC 2976 (SIP info) | |
| DTMF Support | RFC 2833, 2976 (SIP info) |
| ENVIRONMENT & COMPLIANCES | |
| Operating temperature range | -40° to 70° C / -40° to 158 ° F |
| Storage temperature range | -40° to 70° C / -40° to 158 ° F |
| Relative humidity | < 95% not condensing |
| EMC | CE and FCC Part 15 |
| OTHER SPECIFICATIONS | |
| IP address information | Speaks IP address after system boot (requires connected loudspeaker) |
| Dimensions (HxWxD) | 74 x 106 x 30 mm / 2.9” x 4.2” x 1.2” |
| Weight | 0.1 kg / 0.2 lbs |
| Encapsulation material | Steel |
STENTOFON Communications Australia Pty Ltd
670 Mountain Highway, Bayswater VIC 3153, Australia
Phone: +61 3 9729 6600
Fax: 03 9729 0099
Postal Address:
PO Box 1095
Bayswater Business Centre
AU-Bayswater VIC 3153
Australia
