The VoIP Intercom Module utilizes the latest technology to create unparalleled audio quality. Some of the many features include: HD voice quality, Open Duplex, Active Noise Cancellation, Automatic Volume Adjustment, MEMS microphone support, and a 10W Class D amplifier. These features, in conjunction with Zenitel’s 70 years of experience with acoustic technology are only a few of the many factors that make our audio quality second to none.
See also: additional documentation on wiki.zenitel.com
| AUDIO | |
| Noise cancelling – suppression of musical noise | YES |
| Noise cancelling – suppression of static noise | YES |
| Noise cancelling – suppression of rapidly changing noise | YES |
| Codecs | G.711, G.722, G.729 |
| Frequency range, G.722 Codec | 200 Hz – 7000 Hz |
| Audio technology | Modes: Full open duplex, switched open duplex |
| Adaptive jitter filter | |
| Local tone generator | |
| Audio mixing – 3 channels | |
| Sound level detection (scream alarm) | |
| Automatic gain control (microphone) | |
| Automatic volume adjustment | |
| Internal speaker amplifier | 10 W class D |
| Supported microphone technologies | Digital MEMS, omnidirectional microphone. Electret omnidirectional microphone |
| Recommended loudspeaker impedance | 8 ohm |
| HARDWARE | |
| Ethernet connector | 1 x RJ 45 |
| All other connectors | Tool less, spring loaded, vibration proof terminals |
| General inputs and outputs | 6 (configurable), |
| Outputs | 12mA as LED drivers |
| Change-over relays (NO+NC+COM) | Max: 250VAC/220VDC, 2A, 60W |
| Power options | PoE and or external power supply |
| PoE (power over Ethernet) | IEEE 802.3af standard, Class 0 (0.44W to 12.95 W) |
| External power supply | 24 VDC (16 – 48 V) |
| Power consumption | Idle 1.8W, max 12W (depending on volume) |
| Audio line out / Induction loop signal | 600 ohm |
| NETWORKING AND PROTOCOLS | |
| Protocols | IPv4 (with DiffServ), SIP, TCP, UDP, HTTPS, TFTP, RTP, DHCP, SNMP, STENTOFON Australia CCoIP® , NTP |
| LAN protocols | Power over Ethernet (IEEE 802.3 a-f) Network Access Control (IEEE 802.1x) |
| Management and operation | HTTP/HTTPS (Web configuration) DHCP and static IP + Zenitel Pulse, Remote automatic software upgrade, Centralized monitoring |
| Advanced supervision functions | E.g. network test, tone test, status reports |
| SIP Support | RFC 3261 (SIP base standard), RFC 3515 (SIP refer), RFC 2976 (SIP info) |
| DTMF Support | RFC 2833, 2976 (SIP info) |
| ENVIRONMENT & COMPLIANCES | |
| Operating temperature range | -40° to 70° C / -40° to 158 ° F |
| Storage temperature range | -40° to 70° C / -40° to 158 ° F |
| Relative humidity | < 95% not condensing |
| EMC | CE and FCC Part 15 |
| Certificates | UL 60950-1, cUL 60950-1, CB to IEC 60950-1 |
| OTHER SPECIFICATIONS | |
| IP address information | Speaks IP address after system boot (requires connected loudspeaker) |
| Country of manufacture | Poland |
| Dimensions (HxWxD) | 32 x 117 x 71 mm |
| Weight | 0.1 kg / 0.2 lbs |
| Encapsulation material | ASA plastic |
| DIN-rail clips | Wago 209 (included) |
STENTOFON Communications Australia Pty Ltd
670 Mountain Highway, Bayswater VIC 3153, Australia
Phone: +61 3 9729 6600
Fax: 03 9729 0099
Postal Address:
PO Box 1095
Bayswater Business Centre
AU-Bayswater VIC 3153
Australia
